1750 Scout Drill

SKU: 33060A04 Category:

The 1750 Scout was designed as a lightweight, economical machine for holes that in difficult locations or where the shallow depths or the programme size does not warrant the expense or logistics of a larger machine. Although originally designed to be quickly broken down into smaller modules for a man portable application, the drill is quickly adapted to a variety of carriers to suit your specific drilling application.

Depending on the options fitted, this versatile drill can be used with a range of Down the Hole (DTH) systems, including:

  • Solid and hollow augers
  • Diamond drilling tooling
  • Rotary Air Blast (RAB)
  • Rotary Mud
  • Small diameter Reverse Circulation (RC)
For quotation please Click here

Additional Information

The multi-purpose 1750 Scout can be used for:

Geotechnical Sampling: Using solid or hollow augers conventional coring with (NMLC) or mud rotary to obtain the samples required. The most difficult locations are accessible with this compact designed machine (although the drill has a wireline winch option it is not recommended that an SPT hammer be used on this machine).

Environmental Sampling: The light weight and small foot print of the 1750 Scout make it an ideal machine for taking those deeper samples that are too hard for hand sampling and access makes a bigger machine on site impractical. Piezometers and other monitoring systems can be easily installed using this machine.

Mineral Exploration: Because it is easily transported in modules, the Scout is an ideal drill for Greenfields exploration, where initial site access is machine might have to be walked or transported by helicopter. Where there is more easily hole access, the drill module can be simply and quickly fitted to a light 4 x 4, single axle trailer of a 4 x 4 agricultural tractor.

Depending on the options fitted the drill can be used for solid auger geochemical sampling. RAB geo-chem, sampling using blade bits, rock rollers and hammer, high speed low torque Diamond drilling or small diameter RC.

Shallow Water Wells: By fitting the 101 side entry swivel under the head, larger volumes of fluids are able to be pumped down the hole without significant pressure loss. This makes the 1750 ideal for those difficult domestic sites where it is impractical to get a larger machine into the location because of height restrictions and general access may cause difficulties. Since the drill has such a small foot print, disturbance to the surrounding garden area is kept to a minimum.

Slope Stabilization: The nature of the rig positioning with soil nailing and slope stabilization, makes the 1750 and ideal choice. The high power and modular configuration allows the tower to be positioned as required, either on scaffolding or anchored to the face, while the power pack and ancillaries are located safely elsewhere

Earthing holes: The low height and compact nature of this machine is ideal for earthing holes next to new or existing installations. The initial low investment also allows the drill to be parked when not required. This allows the holes to be drilled when required rather than fitting a schedule of a third party.

Standard modules and options available allow the 1750 Scout drill to be customise to suit your particular needs.

1750 Scout Drill Auger configuration:
Read More

Toyota Landcruiser upgrade kit:
Read More

Recommended fast moving spares:
Read More

Recommended Strategic engine spares
Read More

Down the hole Auger tools
Read More

RAB Tooling (an independent compressor is required)
Read More

Diamond Conversion
Read More

RC Conversion
Read More

Additional drill options available
Read More